Stacks of Racks

I don't know how many racks I have looked at, either online or in the metal, over the last two weeks. The problem is that I am fussy. I wanted it all - something lightweight that could easily handle the load of a week long unsupported tour and provide enough clearance for my size 11 feet when carrying my large-ish pannier bags.

I also ended up buying (and returning) quite a few racks: the Tortec Ultralite, which I like a lot but proved incompatible with the frame; the Racktime Lightit, which proved to be too short, not providing enough heel clearance; the Tortec Velocity that fouled the 'guards; ...

To cut a long story short, I eventually settled on a Racktime Addit; a solid looking rack, only a very small weight penalty over the Lightit version, but crucially with longer rails which allow mounting the pannier bag further back (and a second set of rails to mount the bag lower, should I choose to), so giving very generous heel clearance. It is also helps that it is beautifully designed and built, certainly a good example of what the Germans are so famous for. I've done a test fit and it is spot-on; but I'll leave the final proper fitting until I do the "tourer conversion" during the week when the missing parts arrive.

Time to enjoy a beer, then!

Version 2.0

The last few days have been very busy trying to get the drawings finalised for the second prototype. Although the design remains fundamentally similar, in the tweak to Ver 2.0, every tube except the head tube changes subtly.

The biggest change will be the EBB that will be ditched in favour of adjustable sliding dropouts (though we are likely to keep the option of the original dropouts available for simpler derailleur-specific builds). Other smaller changes include a slightly smaller top tube and beefier chainstays. All in all, tweaks to make it easier to set-up but also simply ride better.

In parallel, while Andy continues trying to break the Alfine, I have also been preparing the Proto for a week long tour that will take in approximately 500-550 miles in 5 days. I cannot wait, though I do loathe swapping back to a chain after having been spoilt by running the Gates belt drive!

So this week I'll pry the Alfine kit off Andy to test fit it to the Proto just to make sure there are no issues, and then we'll be pressing the button on Ver 2.0. Can't wait!

Spring's here!

It is official. Spring has sprung. Today was sensational! As soon as I'd got the domestic chores out of the way (ok, some of them), I grabbed the bike and headed out in a t-shirt and shorts to enjoy the sun. It was great so great to feel the warmth of the sun on my face, and the wind in my hair after months of wrapping up!

A combination of the day-job, and a bad back have made it difficult to make the progress I'd have liked to with Such, so this weekend I was determined to get some of those issues ticked off the to-do list.

First up was fitting of 'guards and a rack - though I must admit to an ulterior motive: I do plan to go on tour later in the month.

I started with the rack but soon hit a snag, the rack I had chosen, a Tortec Tour Ultralite, would not fit without a compromise of a 2mm spacer each side - this being a result of a little fouling between the rack leg and the dropout. A Tubus Vega with "plate ended" legs as opposed the the "squashed tube" of the Tortec would fit perfectly, so I'll swap the rack for one of these in the meantime. That said, for production, the rack mount point will be modified a little to accommodate Tortec-style rack legs.

With that disappointment, I moved onto the 'guards (or fenders for our friends Stateside!). This was a pleasure. The design of the mounting points requires a little more effort in fitting the rack, but the end result is arguably a lot tidier and crucially does not interfere with the rack mounts (the disc caliper already being well out of the way).

I'm particularly chuffed with how the seatstay bridge mount point has turned out. It does require drilling the 'guard, but it eliminates the nasty bridge bracket that is required when attaching to a brake bolt, and also results in a much more rigid (and consequently rattle free) installation. But mostly (I think) it just looks really tidy.


Purely by coincidence, the Kinesis DC19 fork uses a similar arrangement with the 'guard mounting points halfway up the inside of the fork blades, so this maintains a visual symmetry. Neat, huh? We are looking at alternative fork options, including steel and Ti, hopefully we will be able to replicate this feature.



With disc brakes, plenty of clearance for cushy, pothole-friendly rubber even with full 'guards (32c Vittoria Randonneur Hypers on there at the moment, and loads more room), a completely fuss-free, clean belt-drive, single speed drivetrain (alternatively Alfine - belt or chain, or conventional derailleurs), a silky Ti frame and ready to tour or 'cross if that takes your fancy - is this perhaps the coolest commuter for London?